Adhesion Enhancing Acrylic Dispersion Based Primer for Plasters and Adhesives

General features

Product description

Acrylic-based adherence-enhancing exposed concrete surface primer All Astar is a plaster primer for exposed concrete and ceilings that increases the adhesion of gypsum plaster to the surface and ensures roughening of smooth surfaces.

Content Information

Calcium carbonate+Acrylic+Antibacterial agents++Pigment+Cellulosic ether+Anti-freezing agents.

Physical and Chemical Properties

Form: Liquid standard
Smell: There is a smell
Color: Green gel norm
Water Solubility: Insoluble in water

Relevant Standards/Declarations

TS 13744 (Instead of TS K 208) Adhesion enhancing acrylic dispersion based primers for plasters and adhesives - Features

Scope of application

All primer is used for interior walls and ceilings before plastering and to increase the adhesion of gypsum-lime mortars and cement-based plasters on exposed concrete.

Packaging

Airtight, Polyethylene, 12 lt. ± %2 bucket with lid

Storage conditions

It should be kept closed in its original packaging, in a cool and dry environment at a temperature of at least + 5 º C. If the opened bucket wants to be used again later, its lid should be closed tightly and its contact with air should be cut off. It is recommended to consume within 6 months from the production date under appropriate storage conditions.

Advantages

It creates a good basis for the material to be applied. Since it is water-based, it does not harm the environment. It ensures that the plaster adheres to the surface easily. It prevents rapid water loss on the application surface of the plaster and prevents cracks that may occur on the surface.

Application Surface Features

The surface to be applied should be free of paint, dirt, dust, etc. must be cleared of foreign matter. It must be completely cleaned of residues that prevent adhesion on the surface. The high viscosity ALL primer mixture should be diluted with water before application. Before application, 2-4 lt. It should be mixed with clean water until a homogeneous mixture is obtained. If a more dense and rough surface is desired, the all-primer mixture is prepared by reducing the amount of water and applied to the prepared surface with the help of a textured roller. No material other than water should be added. Before and after application, the application surface and ambient temperature should not be below +5ºC.

Preparation of Mortar

Exposed concrete primer all primer adheres very well to the surface. It increases adherence with its special additive formula. It prevents rapid water loss on the application surface of the plaster and prevents the formation of cracks on the surface. It creates a good basis for the material to be applied. Since it is water-based, it does not harm humans and the environment.

APPLICATION

It should be kept out of reach of children. Keep in a tightly closed container. Avoid contact with eyes, get medical help when necessary.

Shelf life

6 months from the date of production.

Technicial Specifications